4-port 10/100 Mbps Ethernet with 2 fiber port Switch (Multi mode, SC connector)
特色
• Provides 2 x 100-FX fiber port plus 4 x Ethernet ports
• Each port supports both 10/100 Mbps speed auto negotiation
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• Automatic MDI/MDI-X crossover for plug-and-play
• Store-and-forward architecture
• Supports operating temperatures from 0 ~ +70 °C
• Multi-mode, SC Connector Fiber supports
介绍
The NS-206FC is a 4-port unmanaged Ethernet with dual fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) ransmissions. The NS-206FC provides a wide 10 to 30 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
应用
相似产品
| EMS 防护 | |
|---|---|
| ESD (IEC 61000-4-2) | ± 4 kV Contact |
| LED 灯 | |
|---|---|
| 状态 | Power, Link/Act, 10/100M |
| 以太网 | |
|---|---|
| Ports | 4 x RJ-45, 10/100Base-TX |
| 标准 | IEEE 802.3, 802.3u, 802.3x |
| 處理型式 | Store & forward; wire speed switching |
| MAC 長度 | 1024 |
| 記憶体頻寬 | 1.6 Gbps |
| 幀緩沖存儲器 | 256 Kbit |
| 流量控制 | IEEE 802.3x flow control, back pressure flow control |
| 隔离 | 1500 Vrms 1 minute |
| 光纤 | |
|---|---|
| Ports | 2 x 100 Base-FX, SC connector |
| 模式 | Multi-Mode |
| 光纖線 | 50/125, 62.5/125 or 100/140 gm |
| 距离 | 2 km, (62.5/125 gm recommended) for full duplex |
| 波長 | 1300 or 1310nm |
| TX 輸出 | -20 dBm Min. -14 dBm Max. |
| RX 靈敏度 | -34 dBm |
| 电源 | |
|---|---|
| 反极性保护 | Yes |
| 输入范围 | +10 ~ +30 VDC |
| 功耗 | 0.2 A @ 24 VDC |
| 机构 | |
|---|---|
| 外壳 | Plastic |
| 尺寸 (mm) | 64 x 118 x 101 (W x L x H) |
| 安裝 | DIN-Rail Mounting |
| 环境 | |
|---|---|
| 工作温度 | 0 °C ~ +70 °C |
| 储存温度 | -20 °C ~ +85 °C |
| 湿度 | 10% ~ 90% RH, non-condensing |
